Serra Laser & Waterjet Cutting Company
home
about us
photo gallery
contact us
    Laser Cutting & Waterjet Design Tips Who Can Use WaterJet             E-Mail Us

 2-D Laser Cutting


 3-D Laser Cutting


 5-Axis Laser Cutting


 Waterjet Cutting


 Tube Laser Cutting


 Laser Cutting Thin Material & Copper


 Supplier Page


 Secondary Operations

 
Facilities & Equipment



 Waterjet Cutting Services
 

Specializing in precision waterjet cutting of parts and components for
industrial and commercial requirements. Waterjet cutting is an extremely efficient in creating complex shapes inexpensively and manufacturing forms ready for final machining.

Waterjet Cutting High Precision

We upgraded our waterjet capabilities by adding a NEW  high precision Mitsubishi Waterjet with taper control.

Waterjet Cutting Accuracy

Accuracy of positioning is + or - .001 and taper accuracy is .001 per 1/2 inch of material thickness. We can actively adjust the angle of the waterjet so taper is all to the waste side of the part. The machine has automatic height control which means the standoff off the material is consistent, allowing optimum nozzle position above the material.

The result of this is a very good surface with minimal of no striations, allowing net shape manufacturing or near net shape (NSS) blanks for fast finishing. The waterjet will process a 6 foot by 12 foot plate, up to 8 inches thick. Mitsubishi servo drives are coupled with Mitsubishi controller for accurate positioning, along with reliable long term operation.

Who can use Waterjet Cutting Services

Waterjet cutting services for Virtually
Any Material Up To Eight 8" Inches Thick.

Specialist in Waterjet Cut Parts and Components.

Waterjet Cut Materials

Material Type for
Waterjet Cutting
Cut Minimum Thickness
Cut Maximum Thickness
Aluminum
.001
8.00
Stainless Steel
.001
8.00
Steel
.001
8.00
Marble
.001
4.00
Granite
.001
4.00
Glass
.025
1.00
Plastic
.001
8.00
Acrylic
.010
8.00
Wood
.001
2.00
Virtually any material can be used for waterjet cutting

Alloy Steel
Aluminum
Armor Plate
Brass
Boron
Bronze
Cast Iron
Cobalt
Copper
Exotic Alloys
Hastalloy
Hardened Steel
Hot Rolled Steel
Inconel
Kevlar
Magnesium
Mild Steel
Nickel AlloysStainless Steel
Steel Alloy

Steel Hardened
Steel Hard Rolled
Steel Mild
Steel Tool
Tantalum
Tin
Titanium
Tungsten
Wrought Iron
Zinc
Acrylics
Ceramics
Composites
Foam
Fiberglass
Kevlar
Mylar Laminates
Nylon
Plastics
Plexiglass

Porcelain
PVC
Rubber
Thermoplastics
Teflon
Urethane
Vinyl
Armor Plate
Bullet Proof Glass
Glass
Mirror Glass
Ceramic Tile
Granite
Limestone
Marble
Porcelain
Terrazzo
Hardwood

Waterjet Cutting Service Capabilities

  • Prototype to Production-Short and Long Runs
  • Complex Unique Shapes
  • Quick turn-around of your waterjet cut part
  • Low-cost prototypes with accuracy
  • No tooling lead times
  • Full CNC, CAD, and CAM abilities
  • Waterjet cutting to .015" to 4.0" material thickness range
  • 72" x 144" working area
  • Waterjet Cutting 6' X 12'
  • Dynamic Bevel Control-Straight Cuts
  • Excellent for Pre-Machining
  • 87000 psi- High Pressure - Low Cost
  • Matching accuracy of +/-.005"
  • Waterjet cutting Tolerances:+/-0.005" on most parts. By running slower feedrates, certain parts the tolerance can be +/-0.002".
  • Minimum hole size of 0.090" diameter on waterjet, 0.020 with laser depending on material thickness and type.
  • Square inside corner geometry will cut to a 0.020" radius on waterjet and .005 on laser.
  • Larger inside or outside radius corner will cut slightly faster (less cost) on waterjet
  • aximum material thickness is 8" with waterjet and .625 steel, .500 SS, and .250 AL with laser machine.
  • Maximum sheet size that can be cut is 6' x 12' on waterjet, 5 x 10 on laser machine.

Delivery and Pick-Up is available, 24 Hour Turnaround, National Delivery.

On Time Delivery, meeting and exceeding your expectations. Serra Laser and Waterjet Inc. including services of waterjet cutting is located between Los Angeles and San Diego in Orange County, Anaheim, Southern California CA.

Call us for a quick quote on your next job. Waterjet Cutting Quotes Within an Hour!

 
© Serra Laser and Waterjet Inc.
1740 North Orangethorpe Park, Anaheim, California CA  92801

Precision Laser Cutting & Marking, Waterjet Cutting in Southern California
Supplier of Laser Cut Parts & Waterjet Cutting in the USA
SerraLaser@aol.com

Tel: 714-680-6211
Fax: 714-680-6213
home | about us | photo gallery | get a quote
laser services | 2-D laser cutting | 3-D laser cutting | 5-Axis laser cutting | waterjet cutting | secondary operations | facilities & equipment